Products
- Spare parts
  - Refrigerant circuits
    - Thermostatic valve, expansion
    - Valve, thermostatic valve
    - Thermostatic valve
    - Valve, solenoid valve, 1/4"
    - Valve, solenoid valve, 3/8"
    - Coil for solenoid valve
    - Dry filter, 1/4"-1/4"
    - Rotary compressor without accessories
    - Vibration damper, compressor
    - Cover for compressor
  - Oil/Gas
    - Thermostat, combi thermostat Honeywell
    - Oilburner cpl. VA-M15 wtih flange
    - Sump drain complete, VA-M15
    - Guard above generator compartment, complete, VAM 40
    - Guard above generator compartment, complete, VAM 40
    - Guard above generator compartment, complete, VAM 40
    - Guard above generator compartment, complete, VAM 40
    - Oil supply assembly VAM 15/40 220 V
    - Manometer block, burner, complete
    - Manometer, burner
  - Electrical circuits
    - Rotary switch K & N Cg8-dkc178 E Heat / off / vent / aut
    - Power supply cable
    - Control lamp + gasket, yellow, 10 pcs.
    - Function switch
    - Contactor CI 9 24 V
    - Earth terminal
    - Rubber grommet, DG16, 25 pcs
    - Power supply cable
    - Rubber buttom, black 5 pcs.
    - Softstarter
  - Water Systems
    - Hose, 3/4", 450mm
    - Drip tray
    - Fitting for wire and hose, hose spigot 1/2"
    - Counter nut 1/2", brass
    - ø10/ø6 silicone low pressure hose
    - Hose connection, 5m, FFC, Stucchi couplings
    - Hose connections, 10m, FFC, Stucchi couplings
    - Drain hose, 1/2" Armorvin, 3 m
    - Condensate pump w/plate
    - Drip tray with drain tube components
  - Mechanical
    - Damper motor
    - Shaft extension 12 x 12 x 100
    - Plug, 5-pole
    - Plug, 8-pole
    - Push button, black rubber
    - Fan support
    - Fan support
    - Fan support
    - Fan support
    - Air distribution duct for ventilation, ø315 for 18x24" tent
  - Exterior parts
    - Door, control box
    - Lock washer, M5
    - Handle, box
    - Shielding plate, outdoor air intake
    - Shielding plate, outdoor air intake
    - Shielding plate, outdoor air intake
    - Shielding plate, outdoor air intake
    - Shielding plate, outdoor air intake
    - Air spigot, female, RAL 6031
    - Sealing plate, fuel supply lance
  - Filters
    - Filter kit, 1x ISO C75% (G4) 1x ePM1 70% (F7)
    - Filter packet, 3 x 3 pcs.
    - Bag filter, F5, 490 x 592-5 x 360, synthetic
    - Bag filter, F7, synthetic
    - Sheet filter, PPI 15, front grille, black, CDT
    - Sheet filter, for front grille, CDT 40/40S
    - Sheet filter, for front grille, CDT 60
    - Sheet filter, for front grille, CDT 90
    - Front grille with filter
    - Front grille with filter
  - Fixings
    - Distance bushing, stainless steel, ø12 x 1.5 x 36mm
    - Flange nut M5, compressor
    - Lock washer, ø20, without cover
    - Finger screw M6/15 (20 pcs.)
    - Clip for bulb, ø12/tube ø10
    - Bushing, ø10/ø8.2 x 40mm, stainless steel
    - Clip for heater
    - EMC seal complete, 2 pcs.
    - Distance bushing, felt washer ø20/31 x 3.5mm
    - Distance bushing, ø10/8.2 x 26mm, stainless steel
  - Fans
    - Radial fan without housing , 24 V DC, 310mm
    - Radial fan, 48 V DC, 310mm
    - Fan, radial, internal, 48 V DC
    - Centrifugal fan (with housing)
    - Fan, complete
    - FDO5265-105 (approx. 50mm at 75 kg)
    - FDO5265-126 (approx. 50mm at 100 kg)
    - FDO4054-084 (approx. 50mm at 26 kg)
    - Radial fan, RH31Cpro, with measuring tap, bore ø19
    - Centrifugal fan (with housing), fan BasX 04
  - Miscellaneous
    - AC-M5 set-up and maintenance training, 4 hours
    - AC-M7 set-up and maintenance training, 4 hours
    - AC-M11 set-up and maintenance training, 4 hours
    - AC-M18 set-up and maintenance training, 4 hours
    - VAM 15 set-up and maintenance training, 8 hours
    - Insulating material, insulation for back, control box CDT 30/30S
    - Insulating material, filter gasket
    - Insulating gasket, 4 cables, long
    - Cable set, USB cable, 260mm
    - Cable set, USB cable, 590mm
About
Contact

Dantherm spare parts

Buy original Dantherm spare parts for your Dantherm unit here.

Antenna module

031859-1

Compatible with Specifications

Shipping dimensions and weight

Height (mm)

100

Length (mm)

250

Width (mm)

175

Weight (g)

150

Other specifications

Delivery (days)

140,00

HS / Tariff code

84159000

Country of origin

Item number

031859-1

Item type

Spare Part