Products
- Spare parts
  - Refrigerant circuits
    - Thermostatic valve, expansion
    - Valve, thermostatic valve
    - Thermostatic valve
    - Valve, solenoid valve, 1/4"
    - Valve, solenoid valve, 3/8"
    - Coil for solenoid valve
    - Dry filter, 1/4"-1/4"
    - Rotary compressor without accessories
    - Vibration damper, compressor
    - Cover for compressor
  - Oil/Gas
    - Thermostat, combi thermostat Honeywell
    - Oilburner cpl. VA-M15 wtih flange
    - Sump drain complete, VA-M15
    - Guard above generator compartment, complete, VAM 40
    - Guard above generator compartment, complete, VAM 40
    - Guard above generator compartment, complete, VAM 40
    - Guard above generator compartment, complete, VAM 40
    - Oil supply assembly VAM 15/40 220 V
    - Manometer block, burner, complete
    - Manometer, burner
  - Electrical circuits
    - Rotary switch K & N Cg8-dkc178 E Heat / off / vent / aut
    - Power supply cable
    - Control lamp + gasket, yellow, 10 pcs.
    - Function switch
    - Contactor CI 9 24 V
    - Earth terminal
    - Rubber grommet, DG16, 25 pcs
    - Power supply cable
    - Rubber buttom, black 5 pcs.
    - Softstarter
  - Water Systems
    - Hose, 3/4", 450mm
    - Drip tray
    - Fitting for wire and hose, hose spigot 1/2"
    - Counter nut 1/2", brass
    - ø10/ø6 silicone low pressure hose
    - Hose connection, 5m, FFC, Stucchi couplings
    - Hose connections, 10m, FFC, Stucchi couplings
    - Drain hose, 1/2" Armorvin, 3 m
    - Condensate pump w/plate
    - Drip tray with drain tube components
  - Mechanical
    - Damper motor
    - Shaft extension 12 x 12 x 100
    - Plug, 5-pole
    - Plug, 8-pole
    - Push button, black rubber
    - Fan support
    - Fan support
    - Fan support
    - Fan support
    - Air distribution duct for ventilation, ø315 for 18x24" tent
  - Exterior parts
    - Door, control box
    - Lock washer, M5
    - Handle, box
    - Shielding plate, outdoor air intake
    - Shielding plate, outdoor air intake
    - Shielding plate, outdoor air intake
    - Shielding plate, outdoor air intake
    - Shielding plate, outdoor air intake
    - Air spigot, female, RAL 6031
    - Sealing plate, fuel supply lance
  - Filters
    - Filter kit, 1x ISO C75% (G4) 1x ePM1 70% (F7)
    - Filter packet, 3 x 3 pcs.
    - Bag filter, F5, 490 x 592-5 x 360, synthetic
    - Bag filter, F7, synthetic
    - Sheet filter, PPI 15, front grille, black, CDT
    - Sheet filter, for front grille, CDT 40/40S
    - Sheet filter, for front grille, CDT 60
    - Sheet filter, for front grille, CDT 90
    - Front grille with filter
    - Front grille with filter
  - Fixings
    - Distance bushing, stainless steel, ø12 x 1.5 x 36mm
    - Flange nut M5, compressor
    - Lock washer, ø20, without cover
    - Finger screw M6/15 (20 pcs.)
    - Clip for bulb, ø12/tube ø10
    - Bushing, ø10/ø8.2 x 40mm, stainless steel
    - Clip for heater
    - EMC seal complete, 2 pcs.
    - Distance bushing, felt washer ø20/31 x 3.5mm
    - Distance bushing, ø10/8.2 x 26mm, stainless steel
  - Fans
    - Radial fan without housing , 24 V DC, 310mm
    - Radial fan, 48 V DC, 310mm
    - Fan, radial, internal, 48 V DC
    - Centrifugal fan (with housing)
    - Fan, complete
    - FDO5265-105 (approx. 50mm at 75 kg)
    - FDO5265-126 (approx. 50mm at 100 kg)
    - FDO4054-084 (approx. 50mm at 26 kg)
    - Radial fan, RH31Cpro, with measuring tap, bore ø19
    - Centrifugal fan (with housing), fan BasX 04
  - Miscellaneous
    - AC-M5 set-up and maintenance training, 4 hours
    - AC-M7 set-up and maintenance training, 4 hours
    - AC-M11 set-up and maintenance training, 4 hours
    - AC-M18 set-up and maintenance training, 4 hours
    - VAM 15 set-up and maintenance training, 8 hours
    - Insulating material, insulation for back, control box CDT 30/30S
    - Insulating material, filter gasket
    - Insulating gasket, 4 cables, long
    - Cable set, USB cable, 260mm
    - Cable set, USB cable, 590mm
About
Contact

Dantherm spare parts

Buy original Dantherm spare parts for your Dantherm unit here.

Radial fan, ø225mm

098753

Compatible with Specifications

Shipping dimensions and weight

Height (mm)

100

Length (mm)

225

Width (mm)

225

Weight (g)

2300

Other specifications

Identification

R4E225

Delivery (days)

77,00

HS / Tariff code

84145935

Country of origin

Item number

098753

Item type

Spare Part

Earlier item no.

094815,094816,094671,094669